Things to remember when submitting artwork:

Resolution

• Artwork should be no less than 300dpi.

Colour Mode

• Colour mode must be set as CMYK (Not RGB)

Bleed

• 3mm external bleed around all artwork. Anything that touches a trimmed edge must extend 3mm past it.

Internal Margin

• We recommend you keep all important information at least 3mm from the trimmed edge.

Line Thickness

• Minimum thickness that can be printed is 0.3pt.

Trim/Cropmarks

• Required for vector based files.
• Preferred for raster based files.

Fonts

• Embed or outline all fonts used.
• When converting fonts to outlines, remember that stray point still contain fonts. These stray fonts are to be deleted.

Transparency

• If a transparency is applied to artwork please flatten/rasterise image with this effect.